router help [tech][views:4913][posts:91]_____________________________________ [Jul 15,2009 1:04am - xanonymousx ""] i just realized that the router firmware on my linksys was out of date... so i decided to update it... right after i updated it, it is not recognized on my cpu [wirelessly] and is not recognized when i plug it in to the slots on the back, anyone have any ideas of what i can do to fix this? |
| _____________________________________ [Jul 15,2009 1:33am - xanonymousx ""] ok i got so wired it works, but i dont know how to turn the wireless on... going to http://192.168.1.1 goes no where now.... egh |
| _____________________________________ [Jul 15,2009 8:03am - xanonymousx ""] right now it says, my routers ip is... i type that in my browser and i get nothing. |
| ____________________________________________________ [Jul 15,2009 8:27am - menstrual_sweatpants_disco ""] Keep your computer plugged in via the wired cable. There's a reset pin in the back of the router. Hold it for like 20 seconds and it should reset back to factory defaults. Reboot your machine (easier than troubleshooting if you have a new IP via DHCP). And try http://192.168.1.1 again. Username should be blank. Password should be "admin". |
| _________________________________ [Jul 15,2009 8:29am - RustyPS ""] what MSD said.... YOU GONNA GIT HACKD |
| __________________________________ [Jul 15,2009 11:55am - sxealex ""] dude guy if u have linksys wrt get dd-wrt firmware shits dope |
| __________________________________ [Jul 15,2009 11:57am - sxealex ""] here is my router go haxor it :P sxealex.com:8080 |
| _______________________________________ [Jul 15,2009 12:03pm - the_reverend ""] dd-wrt is sexy... I would use it, but I just bought a recertified netgear http://www.newegg.com/Product/Product.aspx?Item=N82E16833122274 but I'm going to use it for the draft-n and gig-port switch to replace a gig switch and a a/b/g AP that I have. Now that I think about it, I'm going to still need my 54RT downstairs. maybe I will put dd-wrt on it. I just realized that I have to keep the linksys downstairs and put in a gig switch (unless I put the netgear down there) otherwise, I won't have gig from my desktop to my storage. lame. |
| ______________________________________ [Jul 15,2009 12:03pm - xanonymousx ""] im trying to get to the internet page of it 192.... is still doing nothing. |
| __________________________________ [Jul 15,2009 12:04pm - sxealex ""] you on windows? mac? linux? |
| __________________________________ [Jul 15,2009 12:05pm - sxealex ""] on windows open a command line and type ipconfig itll show your router address on mac and linux open terminal and type ifconfig its almost the same thing |
| _______________________________________ [Jul 15,2009 12:07pm - the_reverend ""] he's on a mac. |
| __________________________________ [Jul 15,2009 12:07pm - sxealex ""] gigabit lan is cool but its a bit overkill for me |
| _______________________________________ [Jul 15,2009 12:07pm - the_reverend ""] http://www.officedepot.com/a/products/3514...pping-_-Linksys-_-Supplies-_-351487 holy crap... if I wanted the linksys version of what I bought for $34.99, I would have to spend over $100. |
| __________________________________ [Jul 15,2009 12:07pm - sxealex ""] sxealex said:on mac and linux open terminal and type ifconfig its almost the same thing :P |
| ______________________________________ [Jul 15,2009 12:08pm - xanonymousx ""] the router is an old wireless b model... befw11s4 |
| __________________________________ [Jul 15,2009 12:08pm - sxealex ""] bunk |
| _______________________________________ [Jul 15,2009 12:09pm - the_reverend ""] I need gig cause 1) I have all my storage in the other room and move TB worth of data around 2) iSCSI targetting from my desktop. |
| __________________________________ [Jul 15,2009 12:10pm - sxealex ""] aint supported just checked |
| __________________________________ [Jul 15,2009 12:11pm - sxealex ""] you find your router address? |
| __________________________________ [Jul 15,2009 12:12pm - sxealex ""] http://www.newegg.com/Product/Product.aspx?Item=N82E16833124190&Tpk=wrt54gl this is my router im happy with it and now with linksys selling the gigabit stuff u can buy it off people for like 40 bucks |
| ______________________________________ [Jul 15,2009 12:14pm - xanonymousx ""] did that ifconfig thing bunch of shit popped up... damn. |
| _______________________________________ [Jul 15,2009 12:15pm - the_reverend ""] I've gone through like 5 of those wrt54s. they always break after a 1.5 years. |
| ______________________________________ [Jul 15,2009 12:16pm - xanonymousx ""] if i go to the system preferences, it gives me a strand of numbers, but i do the http:// thing and it times out. |
| _______________________________________ [Jul 15,2009 12:19pm - the_reverend ""] "did that ifconfig thing bunch of shit popped up... damn." any 192.168 addresses/ |
| ______________________________________ [Jul 15,2009 12:20pm - xanonymousx ""] nope got two that start with 24. including the router. |
| ______________________________________ [Jul 15,2009 12:21pm - xanonymousx ""] i got a 127. |
| __________________________________ [Jul 15,2009 12:22pm - sxealex ""] paste the output of ifconfig |
| ______________________________________ [Jul 15,2009 12:24pm - xanonymousx ""] Last login: Wed Jul 15 12:23:49 on ttys000 c-24-147-31-82:~ jim$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fd0a:fcf6:2ac2:89e8:216:cbff:fece:a2e2 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::216:cbff:fece:a2e2%en0 prefixlen 64 scopeid 0x4 inet 24.147.31.82 netmask 0xfffffc00 broadcast 24.147.31.255 ether 00:16:cb:ce:a2:e2 media: autoselect (10baseT/UTP <half-duplex>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:16:cb:ff:fe:ec:00:58 media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:f3:d9:1b:3d media: autoselect (<unknown type>) status: inactive supported media: autoselect c-24-147-31-82:~ jim$ |
| _______________________________________ [Jul 15,2009 12:28pm - the_reverend ""] http://24.147.31.1 ? |
| __________________________________ [Jul 15,2009 12:29pm - sxealex ""] dude i think your router is fucked up it looks like its working as a switch |
| _______________________________________ [Jul 15,2009 12:29pm - the_reverend ""] are you plugged in wired? |
| __________________________________ [Jul 15,2009 12:29pm - sxealex ""] 24.147 i think thats comcast yes? |
| _______________________________________ [Jul 15,2009 12:30pm - the_reverend ""] and it should be acting like a switch on the lan side. |
| __________________________________ [Jul 15,2009 12:31pm - sxealex ""] yea but i doubt the router is issuing that ip its too nutty |
| ______________________________________ [Jul 15,2009 12:31pm - xanonymousx ""] i think it is... i am plugged in wired. i tried updating the firmware last night cause it was from 2001 or something. i guess it fucked up now the wireless is fucked and ps3 wont connect through the wire |
| __________________________________ [Jul 15,2009 12:32pm - sxealex ""] what happens when you hold down the reset button for like 30 sec |
| _______________________________________ [Jul 15,2009 12:32pm - the_reverend ""] I looked up 24.147 to see if it was like 64 in windows trying to make a localnetwork. |
| __________________________________ [Jul 15,2009 12:33pm - sxealex ""] no local is 169. some thing . something |
| _______________________________________ [Jul 15,2009 12:34pm - the_reverend ""] this is why most things say "if you aren't having issues, don't upgrade" |
| ______________________________________ [Jul 15,2009 12:34pm - xanonymousx ""] nothing. |
| _______________________________________ [Jul 15,2009 12:34pm - the_reverend ""] 64, 169, whatever. it's always a bad state to be in. |
| __________________________________ [Jul 15,2009 12:35pm - sxealex ""] sxeosx:~ sxealex$ whois 24.147.31.1 Comcast Cable Communications Holdings, Inc RW2-NORTHEAST-4 (NET-24-147-0-0-1) 24.147.0.0 - 24.147.255.255 Comcast Cable Communications Holdings, Inc NEW-ENGLAND-10 (NET-24-147-0-0-2) 24.147.0.0 - 24.147.127.255 |
| _______________________________________ [Jul 15,2009 12:35pm - the_reverend ""] are the lights on the router working? is it plugged in? |
| ______________________________________ [Jul 15,2009 12:37pm - xanonymousx ""] yes the lights are working the internet and the light where the ethernet going from the router to my cpu are flashing the wireless light is off |
| __________________________________ [Jul 15,2009 12:38pm - sxealex ""] here is the deal your router is working as a switch or bridge and it only knows the mac address of your computer which was probably cloned on the router |
| __________________________________ [Jul 15,2009 12:38pm - sxealex ""] it wont issue you multiple ips anyway from comcast |
| ______________________________________ [Jul 15,2009 12:40pm - xanonymousx ""] haha my luck this past week has been shitty... anyway you know a fix? |
| __________________________________ [Jul 15,2009 12:42pm - sxealex ""] dat router needs to be reset hold down the button with a pen 15 |
| _______________________________________ [Jul 15,2009 12:42pm - the_reverend ""] WAIT A SECOND!!!! alex probably hit the nail on the head. did you plug the WAN cable in to the LAN side? |
| __________________________________ [Jul 15,2009 12:42pm - sxealex ""] OH LOL |
| __________________________________ [Jul 15,2009 12:42pm - sxealex ""] good call |
| ___________________________________ [Jul 15,2009 12:43pm - dertoxia ""] what do you get when you type in ipconfig? The default gateway should be the IP of the router. |
| _______________________________________ [Jul 15,2009 12:43pm - the_reverend ""] that's exactly what it looks like. which now makes sense (except for the v6 addy is comcast down that now?) |
| __________________________________ [Jul 15,2009 12:44pm - sxealex ""] dertoxia- his router aint issuing him an ip even he got it from comcasts dhcp somehow |
| _______________________________________ [Jul 15,2009 12:46pm - the_reverend ""] I tried port scanning and pinging 24.147.31.82, but got nothing back. |
| ______________________________________ [Jul 15,2009 12:48pm - xanonymousx ""] this is weird everything is plugged in the way it should be modem to routers internet, then i have a ethernet from a port in the back to my cpu. |
| _______________________________________ [Jul 15,2009 12:48pm - the_reverend ""] oops, now it works. Location Result min. rrt avg. rrt max. rrt Amsterdam3, Netherlands: Okay 88.1 89.6 91.4 Amsterdam2, Netherlands: Okay 89.5 90.8 93.6 Florida, U.S.A.: Okay 59.1 60.3 62.6 Hong Kong, China: Okay 274.8 277.0 282.5 Sydney, Australia: Packets lost (10%) 256.7 260.2 269.2 New York, U.S.A.: Okay 22.8 23.7 25.7 Stockholm, Sweden: Okay 117.1 117.6 121.0 Santa Clara, U.S.A.: Okay 103.2 105.0 107.2 Vancouver, Canada: Okay 118.3 120.3 124.5 Krakow, Poland: Okay 117.4 119.2 121.0 London, United Kingdom: Okay 94.4 96.2 98.5 Madrid, Spain: Okay 107.8 110.7 125.1 Cagliari, Italy: Okay 134.4 136.4 138.5 Singapore, Singapore: Okay 305.7 310.1 314.5 Austin, U.S.A.: Okay 66.9 67.8 68.0 Cologne, Germany: Okay 110.4 110.6 111.5 Munchen, Germany: Okay 114.0 115.1 118.1 Amsterdam, Netherlands: Okay 97.6 99.1 102.5 Paris, France: Okay 95.7 96.5 97.9 Shanghai, China: Checkpoint temporarily not available - - - Melbourne, Australia: Okay 267.0 269.3 271.6 Copenhagen, Denmark: Okay 114.3 114.6 115.7 Rio de Janeiro, Brazil: Checkpoint temporarily not available - - - Lille, France: Okay 104.5 105.3 106.9 San Francisco, U.S.A.: Okay 97.7 98.0 98.5 Chicago, U.S.A.: Okay 36.1 37.5 39.8 Zurich, Switzerland: Okay 115.7 119.0 123.9 Johannesburg, South Africa: Okay 392.1 400.2 420.5 Mumbai, India: Okay 211.5 212.3 214.3 Nagano, Japan: Okay 214.6 218.1 219.9 Haifa, Israel: Okay 152.9 155.0 158.2 Auckland, New Zealand: Okay 211.0 213.1 215.9 Groningen, Netherlands: Okay 113.3 115.4 117.2 Antwerp, Belgium: Okay 97.9 99.6 102.9 Dublin, Ireland: Okay 118.7 119.6 120.7 Moscow, Russia: Okay 163.8 164.7 169.0 Oslo, Norway: Okay 120.5 120.9 121.0 |
| __________________________________ [Jul 15,2009 12:48pm - sxealex ""] its because he has a mac with a firewall |
| _______________________________________ [Jul 15,2009 12:49pm - the_reverend ""] traceroute to 24.147.31.82 (24.147.31.82), 30 hops max, 40 byte packets 1 v53-853a.ps2.fra.routeserver.net 85.25.86.1 5.455 ms 3.950 ms 2.258 ms 2 static-ip-85-25-95-34.inaddr.intergenia.de 85.25.95.34 0.129 ms 0.138 ms 0.162 ms 3 l0.core1.fra3.inetbone.net 83.220.157.37 0.568 ms 0.452 ms 0.461 ms 4 tge-4-2.bbr1.dus1.de.inetbone.net 213.203.213.70 6.120 ms 5.623 ms 4.194 ms 5 tge-3-2.car2.Duesseldorf1.Level3.net 212.162.49.33 4.256 ms 4.229 ms 4.254 ms 6 ae-33-51.ebr1.Dusseldorf1.Level3.net 4.69.139.1 4.393 ms 4.402 ms 4.274 ms 7 ae-2-2.ebr2.Frankfurt1.Level3.net 4.69.132.138 4.433 ms 4.543 ms 4.321 ms 8 ae-44-44.ebr2.Washington1.Level3.net 4.69.137.62 94.943 ms ae-43-43.ebr2.Washington1.Level3.net 4.69.137.58 93.735 ms ae-44-44.ebr2.Washington1.Level3.net 4.69.137.62 94.943 ms 9 ae-62-62.csw1.Washington1.Level3.net 4.69.134.146 95.505 ms ae-82-82.csw3.Washington1.Level3.net 4.69.134.154 100.410 ms ae-92-92.csw4.Washington1.Level3.net 4.69.134.158 94.687 ms 10 ae-4-99.edge1.Washington1.Level3.net 4.68.17.208 94.800 ms ae-1-69.edge1.Washington1.Level3.net 4.68.17.16 95.586 ms ae-4-99.edge1.Washington1.Level3.net 4.68.17.208 94.800 ms 11 COMCAST-IP.edge1.Washington1.Level3.net 4.79.231.14 94.688 ms COMCAST-IP.edge1.Washington1.Level3.net 4.79.231.2 94.400 ms COMCAST-IP.edge1.Washington1.Level3.net 63.210.62.158 95.419 ms 12 pos-0-13-0-0-cr01.newyork.ny.ibone.comcast.net 68.86.85.98 94.707 ms 95.389 ms 95.705 ms 13 pos-0-14-0-0-ar01.chartford.ct.hartford.comcast.net 68.86.90.58 104.587 ms 104.754 ms 103.758 ms 14 po-10-ar01.berlin.ct.hartford.comcast.net 68.87.146.30 102.115 ms 103.175 ms 103.593 ms 15 be-16-ar01.woburn.ma.boston.comcast.net 68.87.146.49 109.008 ms 108.384 ms 107.694 ms 16 po-22-ur02.lawrence.ma.boston.comcast.net 68.87.144.138 107.218 ms 106.791 ms 106.847 ms 17 68.85.184.242 106.573 ms 106.923 ms 107.176 ms 18 c-24-147-31-82.hsd1.ma.comcast.net 24.147.31.82 109.217 ms 111.137 ms 113.182 ms |
| _______________________________________ [Jul 15,2009 12:51pm - the_reverend ""] xax, did you unplug cables to hook up the router? either you plugged the WAN cable in to a LAN port or your router is passing through (bridging). that would mean you are fucked unless you reset the router. |
| __________________________________ [Jul 15,2009 12:51pm - sxealex ""] if u have 2 ethernet ports you can use your mac as a router then the modem as a switch |
| __________________________________ [Jul 15,2009 12:52pm - sxealex ""] i mean router as a switch |
| _______________________________________ [Jul 15,2009 12:56pm - the_reverend ""] he's already using his router for it's switch ports so I think he knows that. |
| __________________________________ [Jul 15,2009 12:57pm - sxealex ""] but i mean if he puts it behind his computer he can get multiple ips so everything he has will work |
| ______________________________________ [Jul 15,2009 12:58pm - xanonymousx ""] i only have 1 ethernet on my laptop. i just unplugged the router im connected direct to the modem im letting the router sit for a bit,,, i dont believe i plugged the WAN into a LAN port. it doesn't seem to want to reset while im doing so |
| _______________________________________ [Jul 15,2009 12:58pm - the_reverend ""] oh, I missed the comment before that. yes he can, but that's not what he wants. |
| _________________________________ [Jul 15,2009 1:00pm - sxealex ""] lol we are trying to figure out whats wrong with the router and its sitting there doing nothing |
| _____________________________________ [Jul 15,2009 1:01pm - xanonymousx ""] no i just upplugged it i plugged it in right again now |
| _________________________________ [Jul 15,2009 1:01pm - sxealex ""] xax- plug your mac into the router wait a min or so then do ifconfig... copy the output..... reconnect your mac to the modem, then paste the output to us |
| _________________________________ [Jul 15,2009 1:02pm - sxealex ""] ah so confused |
| _________________________________ [Jul 15,2009 1:02pm - sxealex ""] do that stuff anyway :P |
| _____________________________________ [Jul 15,2009 1:03pm - xanonymousx ""] router Last login: Wed Jul 15 12:23:58 on ttys000 c-24-147-31-82:~ jim$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fd0a:fcf6:2ac2:89e8:216:cbff:fece:a2e2 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::216:cbff:fece:a2e2%en0 prefixlen 64 scopeid 0x4 inet 24.147.31.82 netmask 0xfffffc00 broadcast 24.147.31.255 ether 00:16:cb:ce:a2:e2 media: autoselect (100baseTX <full-duplex>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:16:cb:ff:fe:ec:00:58 media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:f3:d9:1b:3d media: autoselect (<unknown type>) status: inactive supported media: autoselect c-24-147-31-82:~ jim$ |
| _____________________________________ [Jul 15,2009 1:04pm - xanonymousx ""] modem ast login: Wed Jul 15 13:02:42 on ttys000 c-24-147-31-82:~ jim$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fd0a:fcf6:2ac2:89e8:216:cbff:fece:a2e2 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::216:cbff:fece:a2e2%en0 prefixlen 64 scopeid 0x4 inet 24.147.31.82 netmask 0xfffffc00 broadcast 24.147.31.255 ether 00:16:cb:ce:a2:e2 media: autoselect (100baseTX <full-duplex,flow-control>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:16:cb:ff:fe:ec:00:58 media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:f3:d9:1b:3d media: autoselect (<unknown type>) status: inactive supported media: autoselect c-24-147-31-82:~ jim$ |
| _________________________________ [Jul 15,2009 1:04pm - sxealex ""] press the reset button u do that? |
| _________________________________ [Jul 15,2009 1:05pm - sxealex ""] for a good 30 seconds |
| _________________________________ [Jul 15,2009 1:06pm - sxealex ""] then repeat the ifconfig for the router |
| _____________________________________ [Jul 15,2009 1:07pm - xanonymousx ""] yep |
| _________________________________ [Jul 15,2009 1:07pm - sxealex ""] also unplug and replug after reset |
| _____________________________________ [Jul 15,2009 1:08pm - xanonymousx ""] Last login: Wed Jul 15 13:07:52 on ttys000 c-24-147-31-82:~ jim$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fd0a:fcf6:2ac2:89e8:216:cbff:fece:a2e2 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::216:cbff:fece:a2e2%en0 prefixlen 64 scopeid 0x4 inet 24.147.31.82 netmask 0xfffffc00 broadcast 24.147.31.255 ether 00:16:cb:ce:a2:e2 media: autoselect (100baseTX <full-duplex>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030 lladdr 00:16:cb:ff:fe:ec:00:58 media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:f3:d9:1b:3d media: autoselect (<unknown type>) status: inactive supported media: autoselect c-24-147-31-82:~ jim$ |
| _________________________________ [Jul 15,2009 1:09pm - sxealex ""] ok on the router keep try reset and unplug and shit till inet 24.147.31.82 is different if you cant change it unplug the router and throw it in the trash XD |
| _____________________________________ [Jul 15,2009 1:13pm - xanonymousx ""] ok thanks for your help much appreciated. |
| ______________________________________ [Jul 15,2009 1:13pm - the_reverend ""] unplug the router from your modem. just plug your mac directly into the router without the router being connected to anything else. |
| _________________________________ [Jul 15,2009 1:15pm - sxealex ""] http://boston.craigslist.org/gbs/sys/1270276535.html http://boston.craigslist.org/gbs/sys/1266675253.html |
| _________________________________ [Jul 15,2009 1:15pm - sxealex ""] the_reverend said:unplug the router from your modem. just plug your mac directly into the router without the router being connected to anything else.:ralphie: agreed and post the ifconfig |
| _________________________________ [Jul 15,2009 1:16pm - sxealex ""] WOA look http://southcoast.craigslist.org/sys/1251565803.html |
| ______________________________________ [Jul 15,2009 1:27pm - the_reverend ""] I want a modem/router/ap in one that does N and triple speed. |
| ______________________________________ [Jul 24,2009 3:50pm - the_reverend ""] and? |
| ____________________________________________________ [Jul 25,2009 2:48am - menstrual_sweatpants_disco ""] He's probably only getting a public IP address on his workstation because he switched from going straight into the modem from straight into the router. If you're quick enough switching plugs your machine won't both looking for a new address via DHCP. It'll keep the IP address he got through the modem. If you haven't done it already... plug into the router and THEN reboot and see what you get via ifconfig (rebooting easier than explaining how to renew IP in these situations). |
| ____________________________________________________ [Jul 25,2009 2:52am - menstrual_sweatpants_disco ""] I just spent the last 2 days at work doing a client's ISP's work for them. They were no help. Bonded T1's going into a Adtran router which then hooks up to an MPLS WAN that connects 4 other sites across the state. Fucknig connection would drop out for a few minutes every hour. Lame. ISP wasn't helping. Turns out it was multiple issues. One of the WIC cards on the router went bad AND somebody on the internal network plugged in a voip phone and set the IP as the default gateway that all the Citrix servers use. yay. Finally got both issues fixed. Multiple things going wrong at once = troubleshooting hell. |
| __________________________________ [Jul 25,2009 11:12am - sxealex ""] yea it really sucks when you are doing this stuff for someone who doesnt know shit cuz they think its your fault you cant get it to work when the isp is the bastard usually. |
| _______________________________________ [Jul 25,2009 11:46am - the_reverend ""] wait, people actually use MPLS? I'm guessing it's a pure ip network? I've always been curious how a router would be set up to handle non-ip traffic over MPLS. Yes, I've theoretically done it by pushing and popping labels, but besides the macs, there is no way to know what an mpls label is unless you set up multiple labels. People should just use S/C vlanstacking since it's basically based on 802.1Q, but I guess you can run out of numbers easily. I'm been working on all these packet types on a new product for over a year. I've also had that issue with keeping the ip, but it's on a mac so I figured they were smarter. But how could he still get out to the net that way? That was my issue. I couldn't get to the net cause the gateway was wrong. |